34150 Compression Fittings 3/16" 5pc
Please fit with care. Please ensure the pipe has a clean and smooth professional cut which will enable the compression olive to create the join. The pipe must be clean and pit free. Tested to 600 bar.
- Imperial compression fittings.
- 34.4mm x 12mm.
- For 3/16" tube assembly without flaring for Cu, CuNi and Steel pipes.
- Supplied in a folding blister pack.
- Also included in an assorted box of compression fittings, Part No. 34162.
TSP: £25.65 ex VAT £30.78 inc VAT
À monter avec précaution. Veillez à une coupe professionnelle propre et lisse du tuyau, ce qui permettra à l'olive de compression de créer le joint. Le tuyau doit être propre et sans piqûres. Testé à 600 bars.
- Connecteur pour ligne de frein - Impériale
- Taille : 34.4mm x 12mm
- Convient pour l'assemblage de tubes en 3/16" sans collet pour les tubes de frein en cuivre, en cupro niquel et en acier.
- Fournis sous blister
- 5 pcs
TSP: £25.65 ex VAT £30.78 inc VAT
Handel met voorzichtigheid. Verzeker U dat de pijp een propere en rechte snede heeft een perfecte dichting mogelijk te maken. Leiding moet net en braamvrij zijn.
- Imperiaal remleiding connectoren
- 34,4mm x 12mm
- Voor 3/16" leidingen te verbinden zonder flare voor koper , nikkel-koper en stalen remleidingen
- Verpakt per 5
- Geleverd in blister.
TSP: £25.65 ex VAT £30.78 inc VAT
Useful Downloads
Related Products
Product Range
Press Release
New mini brake pipe cutter with ratcheting action
Modern brake pipe cutters can be quite small and compact but there are many instances when working on the car where there is still not enough clearance to turn the cutter around the whole circumference of the brake pipe. This new mini brake pipe cutter from Laser Tools (part number 7624) solves this problem with its ratchet mechanism. Simply slide the cutter over the pipe — the handle gives excellent leverage and even if the space is really restricted, a few turns of the handle will quickly and cleanly cut straight through. It is self-adjusting, so no need to keep tightening the blade down onto the pipe as you are cutting. Quick and easy.
Use on 3/16" or 4.75mm brake pipe, steel, cupro nickel or copper.
If you are replacing a section of brake line (perhaps a corroded section) then another product from Connect Workshop Consumables (as with Laser Tools, part of the Tool Connection stable), will prove useful: this brake line connector (part number 34150) provides a quick, convenient method of joining the new pipe section to the existing 3/16" or 4.75mm brake pipe. It is a compression fitting, simply slid over the brake pipe; hold the fitting steady with an 11mm spanner then tighten the end cap with a 12mm spanner; the internal olive is compressed tightly against the brake line.
They will prove to be real timesavers when cutting and replacing brake lines and access is restricted. Available now from your Laser Tools and Connect Workshop Consumables stockist.
As an Amazon Associate I earn from qualifying purchases.